Darkside Snowboards: Rider owned and operated in Vermont
Bataleon Goliath + Snowboard
Jackets/Pants & Gloves
Helmets & Protection
Tools & Accessories
Packs & Travel Bags
Audio & Video
Vew-Do Balance Boards
The Snowboard Commission
In-Store Gift Cards
Join Our Mailing List
Tweets by @DarksideVT
Check out other great sites
Click to enlarge
Bataleon Goliath + Snowboard
We're sorry, but this product is currently out of stock
We call it Goliath+ because it's a beast on all fronts. The core of its strength comes from the Core Core-poppy poplar wood with hardwoods running tip-to-tail along the inserts for a forceful flex. We lace it up with carbon fiber amor, two strips running lengthwise just outside the inserts for beefed up ollies and underfoot power. Then we coat it in a tri-axial weave of fiberglass for tuned response and edge hold at speed. It's all carved into our All Mountain 3BT shaping for the perfect mix of big mountain performance and freestyle finesse. Be David and slay this Goliath+ all over the mountain.
Woodcore- Dual density full wood core composed of poplar with beech running tip to tail along the insert packs. The added beech hardwood strengthens the board’s backbone under the bindings and produces more pop from tip to tail while still offering a comfortable lateral flex.
Base- Hard and fast. Our sintered base material is tough stuff and its microscopic pores retain wax
nuggets for a slick slide. To get the maximum benefits of a sintered base it needs to be waxed regularly. We finish ours with a proper hot wax before they leave the factory.
Layup- Our tri-axial or three-way fiberglass is a weave of fibers in three directions: 45, 0 and -45 degrees. It’s like our bi-ax layup, but with added fibers running tip to tail. This stiffens up the board and adds more snap, while also offering better edge control and grip. The added strands of glasses make boards more aggressive and more responsive overall.
Extra layup- Carbon adds explosive snap, precise control, smooth dampening and it’s feather light. We use it to enhance the ride of our high-end boards. By placing Carbon stringers in key areas of the board we are able to increase the connection between the rails of your board making it feel more responisive
Kevlar can stop a speeding bullet and it can also make your snowboard lighter and snappier in a simular way as carbon does. By placing Kevlar stringers in key areas of the board we can control the way a board flexes and responds to pressure
Layout- We place carbon and Kevlar stringers lengthwise from insert pack to insert pack near the edge to bolster torsional strength, edge hold and add a boatload of snap. It gives the board a powerful underfoot feel while still offering playful ends.
Triple Base Shape
Sidebases Full Length
Camber-Our all mountain freestyle shapes are the most versatile boards in the line. Their twin-ish shapes, more aggressive camber profile, medium centerbase width, and longer contact length between the feet produce a powerful ride with freestyle tendencies and powder float.
Nose is 1cm longer than tail
Even center to sidebase ratio
Freestyle 3BT also featured on: Flyer, The Jam, Fun Kink, Whatever, Feel Better, Push Up
Outline shape- Twin
Shop by Brand
Copyright© 2016 Darkside Snowboards - Killington, Stowe, Okemo, Vermont